BigBigTools

功能建议

欢迎告诉我们您的建议,帮助我们改进工具。 支持粘贴图片或选择上传,最多5张,每张不超过1MB(PNG、JPEG、WebP)。

English简体中文日本語한국어FrançaisDeutschEspañolPortuguês
BigBigTools

Watts to Amps Calculator

in  to in calculator.

A
mA

* Use e for scientific notation. E.g: 5e3, 4e-8, 1.45e12

Watt

Watt (W) is a unit of power. Power is the rate of energy usage per time unit. One watt (W) is equal to one joule (J) per second (S).

Ampere

Ampere (A) is a unit of electric current. Electric current is the rate of electric charge flow per time unit. One ampere (A) is equal to one coulomb (Q) per second (s).

DC watts to amps calculation

The current I in amps (A) is equal to the power P in watts (W), divided by the voltage V in volts (V):

I(A) =
P(W)V(V)

Example

P = 200W, V = 40V

I =
200W40V
= 5A

AC single phase watts to amps calculation

The phase current I in amps (A) is equal to the power P in watts (W), divided by the PF times the RMS voltage V in volts (V):

I(A) =
P(W)PF × V(V)

The power factor of resistive impedance load is equal to 1.

Example

P = 2000W, V = 110V, PF = 0.8

I =
2000W0.8×110V
= 22.72727A

AC three phase watts to amps calculation

Calculation with line to line voltage

The phase current I in amps (A) is equal to the power P in watts (W), divided by square root of 3 times the PF times the line to line RMS voltage VL-L in volts (V):

I(A) =
P(W)√3 × PF × VL-L(V)

The power factor of resistive impedance load is equal to 1.

Calculation with line to neutral voltage

The phase current I in amps (A) is equal to the power P in watts (W), divided by 3 times the PF times the line to neutral RMS voltage VL-N in volts (V):

I(A) =
P(W)3 × PF × VL-N(V)

The power factor of resistive impedance load is equal to 1.

Typical power factor values

Do not use typical power factor values for accurate calculations.

Device Typical power factor
Resistive load 1
Fluorescent lamp 0.95
Incandescent lamp 1
Induction motor full load 0.85
Induction motor no load 0.35
Resistive oven 1
Synchronous motor 0.9

Watts to amps table (120V)

Power (W) Voltage (V) Current (A)
10 watts 120 volts 0.0833 amps
20 watts 120 volts 0.167 amps
30 watts 120 volts 0.250 amps
40 watts 120 volts 0.333 amps
50 watts 120 volts 0.417 amps
60 watts 120 volts 0.500 amps
70 watts 120 volts 0.583 amps
80 watts 120 volts 0.667 amps
90 watts 120 volts 0.750 amps
100 watts 120 volts 0.833 amps
200 watts 120 volts 1.667 amps
300 watts 120 volts 2.500 amps
400 watts 120 volts 3.333 amps
500 watts 120 volts 4.167 amps
600 watts 120 volts 5.000 amps
700 watts 120 volts 5.833 amps
800 watts 120 volts 6.666 amps
900 watts 120 volts 7.500 amps
1000 watts 120 volts 8.333 amps


Additional explanations and examples

How to convert 1 watt to amps

How to convert of 1 to in .

You can calculate (but not convert) the amps from watts and volts:

Amps calculation with voltage of 12V DC

For DC power supply, amps are equal to watts divided by volts.

amp = watt / volt

amps = 1W / 12V = 0.083333A

Amps calculation with voltage of 120V AC

For AC power supply, amps are equal to watts divided by power factor times volts.

amps = watts / (PF × volts)

For resistive load without inductors or capacitors, the power factor is equal to 1:

amps = 1W / (1 × 120V) = 0.008333A

For inductive load (like induction motor), the power factor can be approximately equal to 0.8:

amps = 1W / (0.8 × 120V) = 0.010417A

Amps calculation with voltage of 230V AC

For AC power supply, amps are equal to watts divided by power factor times volts.

amps = watts / (PF × volts)

For resistive load without inductors or capacitors, the power factor is equal to 1:

amps = 1W / (1 × 230V) = 0.004348A

For inductive load (like induction motor), the power factor can be approximately equal to 0.8:

amps = 1W / (0.8 × 230V) = 0.005435A



How to convert 100 watts to amps

How to convert of 100 to in .

You can calculate (but not convert) the amps from watts and volts:

Amps calculation with voltage of 12V DC

For DC power supply, amps are equal to watts divided by volts.

amp = watt / volt

amps = 100W / 12V = 8.3333A

Amps calculation with voltage of 120V AC

For AC power supply, amps are equal to watts divided by power factor times volts.

amps = watts / (PF × volts)

For resistive load without inductors or capacitors, the power factor is equal to 1:

amps = 100W / (1 × 120V) = 0.8333A

For inductive load (like induction motor), the power factor can be approximately equal to 0.8:

amps = 100W / (0.8 × 120V) = 1.0417A

Amps calculation with voltage of 230V AC

For AC power supply, amps are equal to watts divided by power factor times volts.

amps = watts / (PF × volts)

For resistive load without inductors or capacitors, the power factor is equal to 1:

amps = 100W / (1 × 230V) = 0.4348A

For inductive load (like induction motor), the power factor can be approximately equal to 0.8:

amps = 100W / (0.8 × 230V) = 0.5435A



How to convert 1000 watts to amps

How to convert of 1000 to in .

You can calculate (but not convert) the amps from watts and volts:

Amps calculation with voltage of 12V DC

For DC power supply, amps are equal to watts divided by volts.

amp = watt / volt

amps = 1000W / 12V = 83.333A

Amps calculation with voltage of 120V AC

For AC power supply, amps are equal to watts divided by power factor times volts.

amps = watts / (PF × volts)

For resistive load without inductors or capacitors, the power factor is equal to 1:

amps = 1000W / (1 × 120V) = 8.333A

For inductive load (like induction motor), the power factor can be approximately equal to 0.8:

amps = 1000W / (0.8 × 120V) = 10.417A

Amps calculation with voltage of 230V AC

For AC power supply, amps are equal to watts divided by power factor times volts.

amps = watts / (PF × volts)

For resistive load without inductors or capacitors, the power factor is equal to 1:

amps = 1000W / (1 × 230V) = 4.348A

For inductive load (like induction motor), the power factor can be approximately equal to 0.8:

amps = 1000W / (0.8 × 230V) = 5.435A



How to convert 1200 watts to amps

How to convert of 1200 to in .

You can calculate (but not convert) the amps from watts and volts:

Amps calculation with voltage of 12V DC

For DC power supply, amps are equal to watts divided by volts.

amp = watt / volt

amps = 1200W / 12V = 100A

Amps calculation with voltage of 120V AC

For AC power supply, amps are equal to watts divided by power factor times volts.

amps = watts / (PF × volts)

For resistive load without inductors or capacitors, the power factor is equal to 1:

amps = 1200W / (1 × 120V) = 10A

For inductive load (like induction motor), the power factor can be approximately equal to 0.8:

amps = 1200W / (0.8 × 120V) = 12.5A

Amps calculation with voltage of 230V AC

For AC power supply, amps are equal to watts divided by power factor times volts.

amps = watts / (PF × volts)

For resistive load without inductors or capacitors, the power factor is equal to 1:

amps = 1200W / (1 × 230V) = 5.217A

For inductive load (like induction motor), the power factor can be approximately equal to 0.8:

amps = 1200W / (0.8 × 230V) = 6.522A



How to convert 2000 watts to amps

How to convert of 2000 to in .

You can calculate (but not convert) the amps from watts and volts:

Amps calculation with voltage of 12V DC

For DC power supply, amps are equal to watts divided by volts.

amp = watt / volt

amps = 2000W / 12V = 166.667A

Amps calculation with voltage of 120V AC

For AC power supply, amps are equal to watts divided by power factor times volts.

amps = watts / (PF × volts)

For resistive load without inductors or capacitors, the power factor is equal to 1:

amps = 2000W / (1 × 120V) = 16.667A

For inductive load (like induction motor), the power factor can be approximately equal to 0.8:

amps = 2000W / (0.8 × 120V) = 20.833A

Amps calculation with voltage of 230V AC

For AC power supply, amps are equal to watts divided by power factor times volts.

amps = watts / (PF × volts)

For resistive load without inductors or capacitors, the power factor is equal to 1:

amps = 2000W / (1 × 230V) = 8.696A

For inductive load (like induction motor), the power factor can be approximately equal to 0.8:

amps = 2000W / (0.8 × 230V) = 10.870A



How to convert 500 watts to amps

How to convert of 500 to in .

You can calculate (but not convert) the amps from watts and volts:

Amps calculation with voltage of 12V DC

For DC power supply, amps are equal to watts divided by volts.

amp = watt / volt

amps = 500W / 12V = 41.667A

Amps calculation with voltage of 120V AC

For AC power supply, amps are equal to watts divided by power factor times volts.

amps = watts / (PF × volts)

For resistive load without inductors or capacitors, the power factor is equal to 1:

amps = 500W / (1 × 120V) = 4.167A

For inductive load (like induction motor), the power factor can be approximately equal to 0.8:

amps = 500W / (0.8 × 120V) = 5.208A

Amps calculation with voltage of 230V AC

For AC power supply, amps are equal to watts divided by power factor times volts.

amps = watts / (PF × volts)

For resistive load without inductors or capacitors, the power factor is equal to 1:

amps = 500W / (1 × 230V) = 2.174A

For inductive load (like induction motor), the power factor can be approximately equal to 0.8:

amps = 500W / (0.8 × 230V) = 2.717A



How to convert 600 watts to amps

How to convert of 600 to in .

You can calculate (but not convert) the amps from watts and volts:

Amps calculation with voltage of 12V DC

For DC power supply, amps are equal to watts divided by volts.

amp = watt / volt

amps = 600W / 12V = 50A

Amps calculation with voltage of 120V AC

For AC power supply, amps are equal to watts divided by power factor times volts.

amps = watts / (PF × volts)

For resistive load without inductors or capacitors, the power factor is equal to 1:

amps = 600W / (1 × 120V) = 5A

For inductive load (like induction motor), the power factor can be approximately equal to 0.8:

amps = 600W / (0.8 × 120V) = 6.25A

Amps calculation with voltage of 230V AC

For AC power supply, amps are equal to watts divided by power factor times volts.

amps = watts / (PF × volts)

For resistive load without inductors or capacitors, the power factor is equal to 1:

amps = 600W / (1 × 230V) = 2.609A

For inductive load (like induction motor), the power factor can be approximately equal to 0.8:

amps = 600W / (0.8 × 230V) = 3.261A



How to convert 800 watts to amps

How to convert of 800 to in .

You can calculate (but not convert) the amps from watts and volts:

Amps calculation with voltage of 12V DC

For DC power supply, amps are equal to watts divided by volts.

amp = watt / volt

amps = 800W / 12V = 66.667A

Amps calculation with voltage of 120V AC

For AC power supply, amps are equal to watts divided by power factor times volts.

amps = watts / (PF × volts)

For resistive load without inductors or capacitors, the power factor is equal to 1:

amps = 800W / (1 × 120V) = 6.667A

For inductive load (like induction motor), the power factor can be approximately equal to 0.8:

amps = 800W / (0.8 × 120V) = 8.333A

Amps calculation with voltage of 230V AC

For AC power supply, amps are equal to watts divided by power factor times volts.

amps = watts / (PF × volts)

For resistive load without inductors or capacitors, the power factor is equal to 1:

amps = 800W / (1 × 230V) = 3.478A

For inductive load (like induction motor), the power factor can be approximately equal to 0.8:

amps = 800W / (0.8 × 230V) = 4.348A



How to convert watts to amps

How to convert in to in .

You can calculate amps from watts and . You can't convert watts to amps since watts and amps units do not measure the same quantity.

DC watts to amps calculation formula

The I in amps (A) is equal to the power P in watts (W), divided by the V in volts (V):

I(A) = P(W) / V(V)

So amps are equal to watts divided by volts.

amp = watt / volt

or

A = W / V

Example

What is the current in amps when the power consumption is 330 watts and the voltage supply is 110 volts?

I = 330W / 110V = 3A

AC single phase watts to amps calculation formula

The phase current I in amps (A) is equal to the real power P in watts (W), divided by the PF times the RMS voltage V in volts (V):

I(A) = P(W) / (PF × V(V) )

So amps are equal to watts divided by power factor times volts.

amps = watts / (PF × volts)

or

A = W / (PF × V)

Example

What is the phase current in amps when the power consumption is 330 watts, the power factor is 0.8 and the RMS voltage supply is 110 volts?

I = 330W / (0.8 × 110V) = 3.75A

AC three phase watts to amps calculation formula

Amps calculation with line to line voltage

The phase current I in amps (A) is equal to the real power P in watts (W), divided by square root of 3 times the PF times the line to line RMS voltage VL-L in volts (V):

I(A) = P(W) / (√3 × PF × VL-L(V) )

So amps are equal to watts divided by square root of 3 times power factor times volts.

amps = watts / (√3 × PF × volts)

or

A = W / (√3 × PF × V)

Example

What is the phase current in amps when the power consumption is 330 watts, the power factor is 0.8 and the RMS voltage supply is 110 volts?

I = 330W / (√3 × 0.8 × 110V) = 2.165A

Amps calculation with line to neutral voltage

The calculation assumes the loads are balanced.

The phase current I in amps (A) is equal to the real power P in watts (W), divided by 3 times the PF times the line to neutral RMS voltage VL-0 in volts (V):

I(A) = P(W) / (3 × PF × VL-0(V) )

So amps are equal to watts divided by 3 times power factor times volts.

amps = watts / (3 × PF × volts)

or

A = W / (3 × PF × V)



About this tool

* Use e for scientific notation. E.g: 5e3, 4e-8, 1.45e12 Watt (W) is a unit of power. Power is the rate of energy usage per time unit. One watt (W) is equal to one joule (J) per second (S). Ampere (A) is a unit of electric current. Electric current is the rate of electric charge flow per time unit. One ampere (A) is equal to one coulomb (Q) per second (s).

Chat with AI about this tool

Paste the prompt into Gemini. Only the tool name and public page URL are included.

View the prompt